Trap Treatments

 
 

KBL Quick Dye

Pricing Options:



A high quality product from Kaatz Bros. Lures.  Directions: Mix 3 parts unleaded gas with one part KBL Quick Dye to give traps or snares a rust resistant, odorless finish. (We recommend using white gas/Coleman Lantern Fuel for best results, but if using gasoline use a higher octane.) If using mineral spirits, mix 2 parts to 1 part KBL Quick Dye. Stir mixture well before dipping traps. Traps/snares should be degreased and allowed to rust slightly before dipping traps. Traps should be dipped (for 20-30 seconds) and hung to dry in warm weather - 65 degrees or warmer. KBL Quick Dye will coat best during hot days. Avoid direct sunlight during storage time. One quart will dye about 2 dozen small traps or 1 dozen larger traps.

This product was added to our catalog on Thursday 18 July, 2013.

 
 

Copyright © 2018 Volkers Wire Cubbies and Supplies Inc. All Rights Reserved